Mega Data Recovery - Raids and Servers

Raids and Servers

SERVERS AND RAID 1, 0, 5, JBOD Raid, Plus Other Raid Combinations.

MDR rebuild and recover from whatever kind of Server/Raid, even if it is a Software Raid or Raid 0, 1, 5 or any other combination it may be configured.

RAID-0
Raid – 0 is commonly referred to as Stripping. Information’s are split through the member drives but no redundancy is saved. A defect in any member of the component drive will lead to percentage loss of data.

RAID-1
Raid – 1 is commonly referred to as Mirroring. In this type of Raid, data is evenly duplicated through the member drives. A full and total recovery can still be achieved even if one of the components drives fails or damaged.

RAID-5
Raid – 5 is commonly referred to as Striping and Parity. In this type of raid, a minimum of 3 hard drives is needed. Data is stored in stripes and parity among the component. If a failure in one of the drives occur, the defect one can be replaced and rebuilt. Subsequently, a full data recovery is achievable.

There are still many types of raid, these could be JBOD Raid, RAID 5E, RAID 6, RAID 0+1, RAID 1+0 etc.

Whatever the type of raid, Operative system or Machine used, We are well equipped to diagnosed your Raid Combinations and no matter how many drives are in the Raid combinations, Leave it to us and we will do all within our reach to get your treasured and valuable data back as soon as possible. Our Engineers have a wide range and many years of experience and handle such problems almost on daily basis.almost on daily basis.